stone carving tools

Some additional tools are available by special request. If you have any questions on any additional stone sculpture tools contact us by phone or email.

Dry or wet cutting for a range of medium to hard sculpture stone. Available with optional 5/8" - 11 thread flush cut flange.		No flange	w/ flange
	4.5" standard	$15
	4.5" premium	$22	$37
	5" standard		$25
	5" premium	$25	$39

Dry or wet cutting for a range medium to hard carving stone. Mainly used on stones marble hardness and harder. Available with optional 5/8" - 11 thread flush cut flange. Diamond coverage in the steel core as well as the cutting surface.		No flange	w/ flange
	4.5"	$29	$43
	5"	$34	$48
	7"	n/a	$71
	9"	n/a	$96

Highest quality and fastest cutting blades specially made for a variety of stone types. Blade is mounted on a flush mount flange.		4.5"
	Marble	$40
	Granite	$40
	Hard granite	$40

About three times the thickness of a typical diamond cutting blade. Can be used for carving straight on or at an angle or for cutting of wide grooves. V-Style has a V- shaped blade that comes to a point, with a 5/8-11 flange for easy mounting.		Standard	V-style
	4"	$66	$92
	4.5"	$72	$99
	5"	$78	$105

Economy Grade Diamond on edge can be used like a cutting blade 5/8" - 11 flange 40/50 grit	Premium Grade Diamond on edge can be used for cutting 5/8" - 11 flange 50/60 grit		Economy	Premium
		4"	$42	$56
		4.5"	$50	---
		5"	$56	$74
		6"		$90

Our most aggressive diamond cup wheel at 25 grit. With hole, premium grade Flat grinding surface with straight or curved edge
	4.5" straight edge	$50
	4.5" curved edge	sold out

Very thin blade for fast and smooth cutting of marble to harder stone. Design reduces chipping on the cut edge.	4.5"	$22
	5"	$26

Economy grade - 40/50 grit with threaded flange Premium grade - 30/40 grit with 5/8" - 11 threaded nut		Economy	Premium
	4.5"	$50
	5"	$55
	7"		$113

Slower speed grinding than brazed tools, but will have a longer life, especially on hard stones like basalt and granite. Aggressive - 30/40 grit Fine - 80/100 grit Available in aggressive or fine grits. All cup wheels have 5/8" - 11 thread.	2" flat segmented	$30
	4" flat segmented	$59
	4" convex segmented	$79
	4" convex continuous rim	$90
	4.5" flat segmented	$85
	5" flat segmented	$89
	7" flat segmented	$169


1" width x 1.25" length bullet with 1.6" long shaft. 5/8" - 11 standard thread	2" diameter x 5/8" solid diamond cup wheel. 5/8" - 11 standard thread	4" diameter solid diamond cup wheel. 5/8" - 11 standard thread
		4" x 1/2" Sintered cup wheel - $125
Bullet sintered cup Wheel - $75	2" Sintered solid cup wheel - $66	4" x 3/4" Sintered cup wheel - $165

		no picture
2" diameter x 3/8" solid sintered diamond cup wheel with a 2" shaft. 5/8" - 11 standard thread	1.5" ball with 1.6" shaft. For slower speed or variable speed grinders only. Max recommended speed 6000 rpm. 5/8" - 11 standard thread	30 mm (1.2"). Custom made to fit our mini angle grinders. m7 /.75 thread
	1" sintered extension ball cup wheel - $65	Blade - 2mm thick - $25
2" Sintered extension cup wheel - $60	1.5" Sintered extension ball cup wheel $65	Cup wheel - 8mm thick - $35

Coarse flap discs are used to start smoothing a sculpture after grinding and shaping. Used dry at any regular angle grinder speed. Does not require a backer.		4.5"
	40 grit	$10
	80 grit	$10
	150 grit	$10

Diamonds are embedded in a resin for wet polishing. Economy pads currently sold only as a set		3"	4"
		---	---
	50, 100, 200, 400, 800, 1500, 3000, black buff, white buff	---	$75

Diamonds are embedded in a resin for wet polishing.		4"	5"
	50, 100, 200, 400, 800, 1500, 3000	$14	$20
	Final buff - black or white	$20	$29
	Set price - 8 pieces (choose one color buff)	$118	$169

	Diamonds embedded in metallic resin for longer life and better performance on the first stage of wet polishing. Very flexible.		3"	4"
		60 grit	$13	$15

Fast and efficient finishing of softer stones. We recommend resin pads for polishing at grits higher than 400.		3"	4"	5"
	30	$16	$19
	60		$15
	120, 200, 400		$15

5/8" - 11 thread		2"	3"	4"	5"	7"
	Standard		$15	$18	$20
	Super flexible		$15	$18
	Soft foam back	$12	$15
	Stiff foam back				$22	$22


Set A - 3/32" or 1/8" - 10 pcs - $12	Set B - 3/32" or 1/8" - 10 pcs - $12	Set C - 1/8" - 50 pcs - $20

Set D - 1/4"- 10 pcs - $15	Set E - 1/4" - 20 pcs - $25	Set F - 1/8" - 50 pcs - $20

30/40 diamond shown here. Actual burr size is larger	20 piece set. 1/4" shaft Sold individually, or save around 30 % if purchased as a set. Carbide grit best for aggressive grinding on carving stones softer than marble. Diamond grit for long life on sculpture stones of any hardness Specify grit: Coarse carbide = 16 grit Fine carbide = 24 grit Diamond = 30/40 grit		Carbide	Diamond
		Small ball	$7	$14
		Medium ball	$8	$16
		Large ball	$9	$18
		Small football	$8	$16
		Large football	$9	$18
		Small cylinder	$8	$16
		Medium cylinder	$9	$18
		Large cylinder	$10	$20
		Narrow dome	$9	$18
		Wide dome	$11	$22
		Small triangle	$7	$14
		Large triangle	$8	$16
		Small teardrop	$8	$16
		Large teardrop	$9	$18
		Small bullet	$9	$18
		Large bullet	$10	$20
		Short dome	$9	$18
		Flare	$9	$18
		Small saucer	$9	$18
		Large saucer	$12	$24
		SET PRICE	$125	$250

Sintered style has diamonds all the way into the core for long lasting use even on the hardest stones. Use wet or dry. 1/4" shaft Pictured approximately half of actual size. Measurement is Diameter x Height.	Long cylinder - 10 mm x 35 mm	$37
	Short cylinder 15 mm x 13 mm	$34
	Short cylinder 16mm x 16 mm (not pictured)	$36
	Short cylinder 19 mm x 19 mm (not pictured)	$38
	Flare cylinder	$32
	Bullet	$32
	Triangle	$32
	Choose 5 different pieces	$135

1/4" shaft Burrs are larger than pictured.	Triangle - 15mm x 20mm	$26
	Dome - 15mm x 20mm	$26
	Cylinder - 15mm x 20mm	$26
	Box Set 20 pieces in a wood box. 1/4" shaft	$175

	Shape	Grit	Size (D x L)	Price each	5 Piece Price
	SP576	60	7/16" x 1/2"	$2.00	$8
	SP106	36	1/2" x 2-1/2"	$4.50	$18
	A1	24	3/4" x 2-1/2"	$5.00	$20
	A1	36	3/4" x 2-1/2"	$5.00	$20
	A3	24	1 x 2-3/4	$5.50	$22
Select two pieces each of SP106, A1, A3 (6 pieces total)					$25

Felt or silicon carbide. 6mm shaft.		Diameter	Height
	Felt	5 cm	3 cm	$6
	Carbide 60 grit	6 cm	2 cm	$9
	Carbide 60 grit	6 cm	3 cm	$11

Works similar to resin diamond polishing pad. Grits include 60, 150, 300, 500, 1000, 2000, 3000. 6 mm shaft. Meant to be used with a little bit of water. Specify shape: Triangle, Dome or Cylinder
	Set - 7 pc's	$75

1/4" shaft. Apply polishing powder or paste to burr.
	Dome - 20 mm x 20 mm	$2
	Cylinder- 20 mm x 20 mm	$2
	Ball - 20 mm	$2
	Set of 3	$5

Brazed style outlasts electroplated blade by many times. 1/4" shaft.	Actual (cm)	Approx. (in)
	15 mm	.6"	$13
	20 mm	.8"	$15
	25 mm	1"	$18
	30 mm	1.2"	$21
	35 mm	1.35"	$24
	40 mm	1.6"	$27
	45 mm	1.75"	$30
	50 mm	2"	$33

Segmented style. Blade width about 2 mm. For long lasting use on stones ranging as hard as granite. 6mm shaft	Actual (cm)	Approx. (in)
	25 mm	1"	$25
	30 mm	1.2"	$26
	35 mm	1.4"	$27
	40 mm	1.6"	$28
	50 mm	2"	$30
	56 mm	2.25"	$31

Continuous rim style. Blade width about 2 mm. Little bit slower cutting than mounted blades. Can be used for cutting or grinding using the edge, or grinding using the top or bottom surface. For long lasting use on stones ranging as hard as granite. 6 mm shaft	Actual (cm)	Approx. (in)
	15 mm	.6"	$19
	25 mm	1"	$21
	30 mm	1.2"	$22
	35 mm	1.4"	$23
	40 mm	1.6"	$24
	50 mm	2"	$26
	56 mm	2.25"	$27

Loosing the teeth on your carving chisels or bush hammers, or want to make toothed chisels from regular flats? Use this v-shaped diamond grinding wheel to deepen or make new grooves and to sharpen the points on your tools. Grinds hardened steel and carbide well. 6" diameter wheel fits on a regular bench grinder with a 1/2" or 5/8" arbor.
	30 degrees	$60
	35 degrees	$70
	40 degrees	$80
	45 degrees	$90
	65 degrees	$90

Fits on a regular bench grinder with a 1/2", 5/8" or 1" arbor.		8" x 1.5"
	36 grit	$90
	60 grit	$85

Additional types and sizes available.		6mm	10 mm	12mm	19mm	20mm	25mm
	4" length sintered	$20	$20	$25		$30
	8" length sintered			$29	$39		$43

Foam backing	Grit	Each
	30	$16
	60	$14
	120	$12
	200, 400, 800, 1800, 3500	$11
	Set of 8 pads listed above	$75
	Buff pad	$12

Velcro backing. Cut out any shape and make up your own tools. 120 x 180 mm (4.7 x 7.1 inches)	Grit	Each
	60, 120, 200, 400 (electroplated)	$45
	800, 1800, 3500 (resin)	$45
	Set of 7 sheets	$270

Set of 10 pieces in a plastic pouch. Available in 50 or 100 grit	Set Price
	Small	Large
	5 1/2"	6 1/2"
	$10	$15

7"	10"	12"
$25	$28	---
$25	$28	$30
$25	$28	$30
$25	$28	$30
$25	$28	$30
$25	$28	---
$25	$28	$30

The 5 shapes include flat, half round, triangle, square, and round. Available in 50 grit or 100 grit Length refers to approximate file working area not including the handle.	Length	Each	Set Price
	8"	$12	$48
	10"	$14	$56
	12"	$16	$64

Length refers to approximate working area not including the handle	Length	Round	Half Round	Flat
	6"	$2.50	$5.5	$3.5
	8"	$3.50	$7	$5.5
	10"	$4.50	$9	$7
	12"	$7	$12	$9
	14"	$9		$12
	16"			$16

Handmade so size and shape may vary a little, appearance is rustic, but the price is right. Made to sculpt soft stones to those in the hardness range of marble. Large picture of flat chisels view Tooth chisels available, please inquire. Large picture of point chisels view Specify flat end, round tip or chisel tip.	Shaft Size	Each
	3 - 5 mm	$4
	5.5 - 7 mm	$5
	7.5 - 9 mm	$6
	9.5 - 11mm	$7
	11.5 - 13 mm	$8
	13.5 - 15 mm	$9
	15.5 - 17 mm	$10
	17mm +	$12

Round and square hammers in soft iron.	Weight	Round	Square
	400g / .9 lb		$24
	600g / 1.3 lb		$24
	700 g / 1.5 lb	Sold out
	1 kg / 2.2 lb	Sold out	Sold out
Bush hammer 1" x 1" wide - 16 and 25 teeth			$45

Allows pinned sculptures to be rotated on a base, and to be taken apart easily rather than being permanently fixed.	Actual size (mm)	Approx. hole size	Each
	10 x 60	7/16"	$18
	12 x 70	1/2"	$20
	14 x 80	9/16"	$25
	16 x 100	5/8"	$29
	18 x 120	3/4"	$37
	20 x 140	13/16"	$45
	22 x 160	7/8"	$50